I have a 87 4 runner with a 4.3 TBI. Where are you guys mounting the computer with TBI?
Just wanting to see what you've come up with. Mine is in the cab laying on the trans tunnel. I have the harness running between the trans and the tunnel. Not sure if this is the best solution. I have my harness out to solder some wires that have crimp connectors on them now. Figure i'd ask before i put it back together.

Thanks, Doug

 

I mounted my computer behind the glove box. I had to cut the back out so it would close . Then i just zeptie it real good to what ever i could.

 

I mounted mine about the same place as the toyota computer it was tight but got the kick panel over it and it looks stock if you didn't know any better. I thought about cutting a piece of the A post out to recess it but Instead I just smack the floor pan a few times with a hammer to make an extra 1/2 in clearance. I will post some pics as soon as I can.

 

here is pics of where I mounted My TBI ECM