So I did a 3.4 swap on a buddies 94 4runner, thing runs like a champ, but now its getting hot and I put the A/C on the back burner.

I do not have 12v at A/C clutch

I am trying to wire up the A/C amp as dictated in the the A/C stickyI have combed the forums as much as I can to no avail in finding its exact location.

apparently it behind the glove box, all I see it the rear ABS module fan relays and heater - A/C fuses.

I know the other way to do this is to hop the A/C cut relay, but this relay, per what I have read, exists only on the 4cyl models. I have a 6 cyl at.

??????

 

My 88 4 cyl had it on the A/C box itself behind a little plastic cover. Has wires plugging into it.


I used the one from my 99 donor so it would work properly. It was also mounted on the A/C box.

 

It is over there some place going by the 94EWD I wonder if it is on the back side of the evap box

 

Still no luck, I have email mike at ORS since he built the harness. I will definitely post it once I find out