Relay Box Removal
#1
Relay Box Removal
Hi, does anyone know how to remove the relay box in the yellow circle? I need to remove it and mount somewhere else because it interferes with the airbox when I have it installed.
Any suggestions or recommendations are greatly apprecicated.
Thanks.
Any suggestions or recommendations are greatly apprecicated.
Thanks.
#2
I still am unsure that it is suppose to come apart. There are mounting ears towards the rear that I moved it to but I also broke the front ears removing it. I tried to find an unlock tab somewhere. I finally got frustrated and just pried the hell out of it breaking the lock tab. Then I moved it to the back tabs.
Maybe someone has a less redneck approach.
Maybe someone has a less redneck approach.
#3
Thanks, dntsdad. I've tried numerous times to pull, pry, and push to remove it and it just doesn't want to come off. I don't want to break it off but if no suggestions come my way, I will have no other alternative but to do as you have done. Hopefully someone has found a more sane way to remove.
Thanks again for the reply.
Thanks again for the reply.
#4
I don't have that relay box, but I have the box that is next to that. I think it was the obI or diagnostics plug. I pried it from the top and pulled. This was after 10mins of messing with it. there is only a small bump holding it in.
The bump is tiny and thats all it takes to hold that little tiny thing on the fuse box.
The bump is tiny and thats all it takes to hold that little tiny thing on the fuse box.
Last edited by superchiem; Oct 21, 2011 at 06:57 PM.
#5
Ok thanks Superchiem! I actually rotated the entire fuse box where it's perpendicular to the fender like on the '94 Runners and it seems to fix better and leaves a little more clearance.
Thread
Thread Starter
Forum
Replies
Last Post
crashburnoveride
86-95 Trucks & 4Runners
1
Jul 10, 2015 06:39 AM





