alright i am almost done with my swap (99 tacoma 3.4 into 89 3.0 runner)
i am now working on the vacuum hoses, heater hoses, and finally the scariest of the beasts... wiring jk. not wiring but the evap system.

I have looked and i am new to this, my first swap and my first time really taking something and making it my own. problem is i bit off more than i can chew. can anyone help me with the diagrams? what can be eliminated.

I have looked and taken pictures from all the major players here, evolta ( i think that is how you spell it) mt_goat, etc... i feel like i am reading a chinese mcdonalds menu and I cant just order a big mac.

what i am asking for i guess is to say this goes here kinda thing. I have the fuel system just about done and all that is left is some hoses... i hope.

at least after the vacuum system i can turn the key and see what codes pop.

please help!!

 

i know i need pics and they will be coming tonight when the camera gets home. haha


first. on the 3.4 engine harness, a wire bundle comes across the front of the engine and has a series of 3-4 plugs on the end. what are they from? where do they go on the 3.0?

 

To help clarify, we have the Toyota only swaps adapter harness all plugged up at the ecu, we are just not sure where the other end goes.

 

Also just hooked up clutch and it just goes to the floor... And sticks

 

Also just hooked up clutch and it just goes to the floor... And sticks

 

for the clutch, bleed it. If you have already, do it again.

For the wiring stuff, until you post pictures of what you need help with its useless to speculate on how to advise you.

 

Roger wilco

 

well.. should be a couple ends.... one end would go to the o2 sensors another end goes to the maf and the other probly goes to transmission... but like its been said.. without pics.... useless

 

i have no idea what these two wires are... they are not part of a bundle just solo wires.

the brown wire is a ??? the two white wires were to the tranny

where do i connect these??
jk those are the battery cables of course

????

the o2 is one of the last plugs with the white and blue wires. the rest???
on a 3rd gen 4runner that i looked at they went to the tranny
here are those plugs close up.

dont know where this plugs in

one set of wires that doesnt have a plug

and that is where it hooks to the engine