Well, I've looked and searched. And I can't find a solid list of what I need for a 3.4 swap.

I have a 1990 3.0 4runner. 5 speed.
The reason being, the wrecking yard has an untouched donor vehicle. And I can get the engine and all the parts I need for the swap from the truck.
Also if you guys have the random parts I need like the t100 dipstick and stuff that'd be awesome! Haha
Thanks ahead. And if there is already a list you can point me to it. Thanks in advance yotatech!

 

http://www.andrewzook.com/content/view/22/48/1/2/

That should get you started. Also read all the stickies. HUGE wealth of information.

 

Read all the threads at the top of this forum repeatedly. Everything is there.

"Do or do not. There is no try" Yoda the Jedi Master

:wabbit2:

 

ignitor, airbox and all the piping, snorkle behind passenger fender (optional i guess), exhaust to the last O2 sensor, Evap box, ECM, harness for motor, body harness plugs of donor.

off top off my head that is what I can think of.

 

the reason there is no solid list is because every swap is different.

 

also, trythe link in my sig. really good guys and very knowedgable, and in OR.

 

I read the Andrew zook page before. But I think it's been taken down so I can not get any information. It takes me to a go daddy site. Thanks for the quick replies. And I'll read the stickies again.

 

http://www.offroadsolutions.com/tech.html#engine

read the ORS instructions, there is a list of needed parts at the top

 

http://www.pirate4x4.com/forum/showthread.php?t=587453

This is the link that got me started on my swap

 

If you read the 3.4 swap section and couldn't figure out what you need. Then you are not ready for this swap. All of the answers are in there.

 

Andy's site is gone.or I can't find it