3.4 Swaps The 3.4 V6 Toyota engine

3.4 swap stumped

Thread Tools
 
Search this Thread
 
Old Oct 20, 2019 | 12:43 PM
  #1  
Chaseforman1's Avatar
Thread Starter
Registered User
 
Joined: Sep 2019
Posts: 8
Likes: 1
3.4 swap stumped

I finally got my swap done for the most part but have one last issue to tackle to complete my swap. I did a 1996 auto 2wd to manual 1991 awd. It runs strong but when I go above 3k rpms when the cars warmed up it stalls out and stutters really bad. The 2 codes I have are for the transmission only. I've changed out the maf, o2 sensors, and spark plugs with little to no change. As long as I down shift before the rpms get to high the car seems to run pretty good. Any ideas out there? Really stumped
Reply
Old Oct 20, 2019 | 03:19 PM
  #2  
jbtvt's Avatar
Registered User
 
Joined: May 2009
Posts: 578
Likes: 11
From: Southern NH
Fuel pressure and timing all good? Might be getting a knock at higher RPMs/advanced ignition timing?
Reply
Old Oct 20, 2019 | 04:30 PM
  #3  
Chaseforman1's Avatar
Thread Starter
Registered User
 
Joined: Sep 2019
Posts: 8
Likes: 1
Like the engine has a little lifting noise but the fuel pressure is good
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sdstud212001
Arizona
17
Jan 3, 2022 09:32 AM
Chaseforman1
3.4 Swaps
1
Sep 6, 2019 11:38 AM
Knix47
86-95 Trucks & 4Runners
1
Jul 30, 2017 01:08 AM
mt_goat
3.4 Swaps
39
May 23, 2016 11:59 AM
Dewbro91
3.4 Swaps
94
Jul 1, 2010 07:50 PM




All times are GMT -8. The time now is 02:51 PM.