Engine Swaps Swapping an engine in your Toy, here is where to learn how

HELP! Power Loss after Swap

Thread Tools
 
Search this Thread
 
Old Apr 7, 2010 | 01:18 PM
  #1  
YOTABP's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 72
Likes: 0
From: Northern Virginia
HELP! Power Loss after Swap

I just did a 22re swap from my 86 4runner to a 87 22re which supposedly has 100K on it. After the swap it ran like crap. I had no power at all and actually got pulled over for going 5mph on the way to the shop. After the timing was done, a new alt. put in, had to replace a gasket on the exhaust flange. It has gained some power back, but it is still struggling hard. The codes that i pulled were 5, 6, 10, 12. Havent ran them again to check if any went away. If anyone has a clue let me know.
Reply
Old Apr 17, 2010 | 03:28 PM
  #2  
YOTABP's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 72
Likes: 0
From: Northern Virginia
Bump.
Reply
Old Jun 2, 2010 | 02:18 PM
  #3  
LiveCountryWorkCity's Avatar
Registered User
 
Joined: Apr 2010
Posts: 9
Likes: 0
Check your plugs, wires, cap/rotor. Then your injectors
I just had a problem with my 22re, it ended up being the wiring for the first injector.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
Sleaker
86-95 Trucks & 4Runners
17
Aug 26, 2020 06:03 AM
rushw
General Electrical & Lighting Related Topics
4
Jul 18, 2015 01:46 PM
jon.r
General Vehicle Related Topics (Non Year Related)
8
Jul 11, 2015 03:34 PM
karbin
Newbie Tech Section
1
Jul 5, 2015 11:37 PM




All times are GMT -8. The time now is 11:46 AM.