22RE powered Buggy! EFI harness built from scratch!
#1
Registered User
Thread Starter
22RE powered Buggy! EFI harness built from scratch!
I'm doing all the wiring for this buggy. I'm building an EFI harness for it.
I may start offering harness's like this on a case by case bases. Unlike ORS' 22re harness this does everything. You don't reuse any of the factory harness.
Here's the buggy when I got it.
Best way to stay up all night:
Figuring out the wire lengths. The harness will fit the buggy like a glove.
Getting everything ready to start soldering:
Lots of splices later. About 50% or 60% done.
I may start offering harness's like this on a case by case bases. Unlike ORS' 22re harness this does everything. You don't reuse any of the factory harness.
Here's the buggy when I got it.
Best way to stay up all night:
Figuring out the wire lengths. The harness will fit the buggy like a glove.
Getting everything ready to start soldering:
Lots of splices later. About 50% or 60% done.
Trending Topics
#10
im trying to do the same thing. i wana elemanate the stock fuse boxes. what did you do on the other end of the computer? like under the dash. i have 2 wires that im lost with. its a white and red wire, and a black and red wire. on the scamatics it says the black and red wire goes to the injectors and to the positive on the coil end. and that red and white wire i dont know what it goes to......but that wire keeps shorting out and blowing fuses. any idea where i can start at to fix it? if you need any more info just let me know
thanks
thanks
Thread
Thread Starter
Forum
Replies
Last Post