sas steering
05-01-2007, 01:51 PM
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Birmingham, AL
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
sas steering
hey guys im a newbie to the forum and to yotas. i have a 87 runner and tom im going to pic up a steal of a deal on another runner and a set of chevy 1/2 tons locked all for $300. so my question is since my runner is IFS what steering components will i need to do this swap. the conversion process i pretty well have covered, as far as springs and mounts and brake conversion.
05-01-2007, 02:00 PM
#2
Contributing Member
Join Date: Oct 2002
Location: NM
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
do a search on Cross-over steering and Hi-steering.
There a number of good vendors that can sell you come cool steering components.
PartsMike
Marlin
All-Pro
Trail Gear
I would do a Hi-steer setup, so you can keep the tie-rod out of the rocks. Also, having the drag-link connecting to a higher position on the knuckle will reduce bumpsteer.
There a number of good vendors that can sell you come cool steering components.
PartsMike
Marlin
All-Pro
Trail Gear
I would do a Hi-steer setup, so you can keep the tie-rod out of the rocks. Also, having the drag-link connecting to a higher position on the knuckle will reduce bumpsteer.
Thread
Thread Starter
Forum
Replies
Last Post
