Help! How to build highsteer crossover steering for SAS
10-17-2013, 12:39 PM
#1
Registered User
Thread Starter
Help! How to build highsteer crossover steering for SAS
Like it says. I need help!! I know some would say just buy a system from somewhere like Wab or Low Range but thats like $350+
, Id rather build my own. Save on cost and then something else I learn to do that, I can help others with
.
I know I will need the Tubes, tie rod ends, and tube adapters. But I have searched all over the internet and YT
but I have not found any build pics or how to's.
Does any one have pics of ones they built or blue prints?
HELP PLEASE!!
, Id rather build my own. Save on cost and then something else I learn to do that, I can help others with.I know I will need the Tubes, tie rod ends, and tube adapters. But I have searched all over the internet and YT
but I have not found any build pics or how to's.Does any one have pics of ones they built or blue prints?
HELP PLEASE!!
11-07-2013, 06:39 PM
#2
Registered User
Join Date: Dec 2007
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Make a wanted add for high steer arms. I got mine for 62.50. Then you'll need 4 fj80 tie rod ends, 1.25 dom tubing, and weld in bungs. I'm doing this but with heim joints an have 165.00 in it.
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
delmert
84-85 Trucks & 4Runners
11
09-30-2015 04:34 PM
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
08-06-2015 07:43 AM
Backcountry411
86-95 Trucks & 4Runners (Build-Up Section)
4
07-24-2015 08:06 AM
