Ford Dana 30 swap
Mar 8, 2008 | 04:06 PM
#1
Thread Starter
Registered User
Joined: Mar 2008
Posts: 1
Likes: 0
Ford Dana 30 swap
Has anyone ever swaped a dana 30 from a 66-77 ford bronco axle to a 90 model v6 yota truck i have access to some and wondering if they'll fit and how hard it would be to make them fit the diffs on the driver side what about tranny and t-case any feedback would be help thanks
Mar 8, 2008 | 04:35 PM
#2
Registered User
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Has anyone ever swaped a dana 30 from a 66-77 ford bronco axle to a 90 model v6 yota truck i have access to some and wondering if they'll fit and how hard it would be to make them fit the diffs on the driver side what about tranny and t-case any feedback would be help thanks
Nov 15, 2009 | 09:32 PM
#3
Registered User
Joined: Jul 2009
Posts: 3
Likes: 0
From: orangevale, ca
no 30!
i would highly recommend that you do not consider this swap. the dana 30 is a terrible axle not to mention it probably has drums if its that old, the width would be wrong, wrong lug pattern etc,etc. Stick with toyota and you'll be a happy camper
Thread
Thread Starter
Forum
Replies
Last Post
