You should be scared Underwood. You'll be Blinded by the light revved up like a deuce another runner in the night.



We're gonna do some wheelin. You freaks will be squealin and no one will be getting any dents, except Banjo.

He welded his frame. You know.

 

PM'd you with the bad news. Won't be able to get them. Any of the Alabama crew coming through ATL later? Douglasville is about 30 min outside of ATL on I-20.

Brett maybe??? dunno

 

No it turns out the 4cly won't work on the V6 but the V6 will work on the 4cyl. I don't get how that works but thats what Toyota and trail-gear said.

 

If justin is willing to bring them to marc's house or meet us somewhere that is on the way I'd be happy to bring it up. I'll be at Marc's tomorrow around 12-1.

 

Gregg,

OK. that is cool. If there is a way to drill new hole so it will mount on the frame we can do that too. I will be bringing a drill andsome bits. just let me know if I need to bring it up.
BTW I dont need this piece, so we can hack it up and make it fit if necessary! : )

 

Ok Im off....see everyone there!! careful driving.

 

So you aren't going up today with Marc? I called the guy who has the wheels to try to work something out with him, I was planning to hopefully pick them up tonight after work and drive them up to Tellico tonight but there are too many variables plus he lives over an hour and a half from me in the opposite direction of Tellico and wasn't willing to meet me anywhere because he "wasn't making anything on the wheels". If he would drive them as far as Six Flags (about a 2 hr roundtrip for me with no traffic) I would have met him but he wouldn't even come that far. However, if anyone is going up tomorrow then the guy could probably bring them to his work place which is on the south side of Atlanta.

If I can be of anymore help in this please let me know, my cell phone is 404 422 5365.

 

Can't wait, bring it on.

 

Thanks Justinh,

I just flat ran out of time on this one I'm afraid. I appreciate everyone's help on this. I am installing my soft top now & looking locally for a chevy wheel that will work.

 

Anytime, sorry it didn't work out. Was Marc able to reach you? When I talked to him this morning he said that one of his buddies knew someone with some wheels that may work but he didn't have a # to reach you.

 

Got some pics up of the decals!

 

Gimmie that...

 

I'm heading out in about 20 minutes. See you guys tomorrow night! The '85 twins (I'm riding shotgun) will be hitting on some hard stuff tomorrow!

 

Decals look nice Austin! Put me down for some.

Couldn't pick up the t-shirts today...with all the rain, parking lot to his building was 3 feet under water...I started to take the 85 and go get them anyway.

Call the press. Compressor and lockers....operational.

 

OMG

Congrats Wabbit, that must mean you'll be leading a group through Lower 2.

I'm trying to fix my skid plate alignment issues, if not I think we'll have to have a little wrenching session at camp tomorrow. :pat:

 

Right now it says there is going to be a low of 44 sat night so bring your long sleeves and ear muffs!

 

Have fun and be safe. Take lots of pictures. Us poor saps that have to work will be there in spirit.

 

1985 4runner - i got your tire bud. it is mounted on a wheel as well. we pick up my trialor tomorrow morning we'll be at crawfords sometime arround dinner!

 

First SE4RJ local post. https://www.yotatech.com/forums/show...739#post897739


SEE YOU HERE!!

 

Thanks! I got a PM from Andy about the good news.
My rig is ready to go except for the wheel to go with that tire. I have all day tomorow to find one, I think I can with some luck. I got the last shock mounted today & the STC top installed...so I'm ready to roll.