3Linkyota

Thanks see yall there and if i find a place to get some air I will get some air in it I should have my spooled 4.88 3rd in it by then if my tools get here by then !!

ADH8796

How many people going now?

colsoncj

me + gary (rig wise = 2)

ADH8796

I take it that's not all right? Brad's still going right?

design311

Yup, and about 6 - 10 rigs so far. I know it's a broad range but you never know basically until everyone actually shows up

colsoncj

thats the truth.... always expect half of planned.

ADH8796

Sweet I'm hoping to have my 4runner up and going by then but I have a feeling that's going to be alot easier said than done.

design311

What all are you doing to it? Do you have all the parts? I might have a little extra time before the run if you need a hand...

ADH8796

Well I don't have all the parts yet but I should before too long. I'm going to order 5.29's for the front and rear along with aussie lockers and I need to get some shackel hangers and longer shackels and stuff. Right now I just have it sitting on 37's with no lift but I do have 57" fords going in the rear and rears are going up front which should give me about 3" or so. Here's a few pics of how it sits right now:








I'll let you know when I've got all my parts and if you want to come down and lend a hand I'd love to have the help. You any good at setting up gears?

ADH8796

Oh and I need to weld on my sliders and diff protection but that should only take a few hours

colsoncj

dude... awesome work. freakin awesome.

ADH8796

thanks man I'm going to be loving it when it's all done (or a little closer to done haha)

colsoncj

you will be at cass, right?

ADH8796

If I can get the runner finished (most of the way) than I plan on being there for sure. I need someone to help me setup the gears and lockers in the thirds but that's the main thing.

colsoncj

I've done it once in a chevy... but thats about it. I just have someone else do them (who has the press), and then just check before install.

ADH8796

(jeep cory) has done it before so I'm going to see if I can con him into doing it for me.

design311

Yeah, I know absolutely nothing about it. I've seen it done a couple of times but I don't have the tools or really the knowledge to speak of

ADH8796

It's all good I'm hoping to get it done one way or the other.

colsoncj

how is jeep cory? is he comin out to cass too?

ADH8796

He's doing alright he might come out with me but he doesn't have a rig anymore.