Soo, i got jsut about all the kinks and stupid stuff fixed with my 87 2x4, i had temparaly fixed the rust issue above my window, so having done everything else, i decide to fix the rust because after fixing it before it leaked again and im to anal to jsut deal with it, so i plan to ...cut out rust and weld new hand made peices in.

soo i cut, cut some more, and cut more....and find that the lip the window rests on is pretty rusty. im thinking ahhh f%$# i should of jsut let it be and stuck my more window sealer on it and sold it like planed and buy a earlie 4x4 toy, but no..i also happen to put a small crack in the window while im doing this.

So im thinking should i just get someone thats cutting one up to send me the peice, cut my old one out and weld new on in, or jsut weld in the peices i made and use lots of window sealer and sell it ..... pretty bad huh....

 

If you already made the the parts, I would just install them. Then if you don't like it you can get a scraped window frame

 

yeah i did today, welded um in, not to bad. But i may have to cut it all out and replace the lip once i pull the window out. pretty easy with a few beers and buddies with welding experience

 

I thought all 1st gens had 4X4?

 

i wish, this truck is pretty strange, base model 4 speed, wich no one seems to know anything about, and it has a/c and power steering. special order

 

look what i did! i stuck some liquid metel in the cracks, sanded it down, ill post pics later, the roof line is pretty good, but i may have to cut it all out to replace the lip the window sits on, once i pull it, kinda bored and had free time, this is what did to kill the time.

 

did this today, very little bondo, not to bad,have to scrape some exces paint off the window, but the window line is good, need to replace the window now.Ill take pictures in the light tomorrow.