lets see your pics of your two tones
10-08-2006, 06:24 AM
#1
two tone pictures
ok im thinking of doing the bottum portion of my truck in rhyno lining wanted to see some pics of what your trucks look like. any color combos will be appreciated. thanks
Last edited by 89red4x4yota; 10-10-2006 at 06:32 AM.
10-11-2006, 06:23 AM
#6
i might want to to the flares too, im thinking of putting the graphite grey rhyno lining on because i think black is going to be to much. let me know what you guys think!
Trending Topics
10-11-2006, 07:18 AM
#9
Registered User
Join Date: Dec 2005
Location: Edmonton AB
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Here's mine
the silver on the rocker panels was great, super easy to match with grey rust primer and rattle can silver. made it easy to cover up the piles of rust
!!
the silver on the rocker panels was great, super easy to match with grey rust primer and rattle can silver. made it easy to cover up the piles of rust
!!
10-11-2006, 10:43 AM
#10
Registered User
Join Date: Jan 2006
Location: Massachusetts
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
I think the black looks better than the grey. I would also only go to the lower body seem, about 4" or so from the bottom with the Rhino liner stuff. Since your truck is so shiny, I think the rough Rhino coating would be too much if it were half way up the door.
10-11-2006, 12:24 PM
#12
Elvota-thanks it does help, my photoshop skills are sub-par
Blizzard-you did paint not lining right? thats why im a bit hessitant on putting the lining on the fenderflares not sure how the roughness will look on the fenderflares. Looks good! nice colors!
maxpowerhd-if i do it in black then i won't half to touch the fenderflares cause they are allready black...good point. Also i have thought of doing the bottum molding but there is no molding behind the rear wheel, so what would i use for guide lines without it looking like i just randomly sprayed it on?
millertime- i think i looks good too...in those pictures, the drivers side cab corner is starting to bubble a little and it is bubbling right over the tail pipe so i got to do something, and i don't want to paint it....again. it was painted a little while ago but was only grinded and bondo and it came back and bit me in the
so i figure rhyno lining will be the best and it won't rot anymore and will also protect it...i hope.
thanks for the help guys keep them coming!
Blizzard-you did paint not lining right? thats why im a bit hessitant on putting the lining on the fenderflares not sure how the roughness will look on the fenderflares. Looks good! nice colors!
maxpowerhd-if i do it in black then i won't half to touch the fenderflares cause they are allready black...good point. Also i have thought of doing the bottum molding but there is no molding behind the rear wheel, so what would i use for guide lines without it looking like i just randomly sprayed it on?
millertime- i think i looks good too...in those pictures, the drivers side cab corner is starting to bubble a little and it is bubbling right over the tail pipe so i got to do something, and i don't want to paint it....again. it was painted a little while ago but was only grinded and bondo and it came back and bit me in the
so i figure rhyno lining will be the best and it won't rot anymore and will also protect it...i hope.thanks for the help guys keep them coming!
10-12-2006, 12:22 PM
#16
marty i saw your truck you did a good job. yeah a heavy duty truck parts store up where i live sells rhyno lining in spray cans or gallons not sure how much thats the root im planning on going, just need to figure out what body line to use, and what color
12-19-2006, 12:09 PM
#18
Registered User
Here's the start of my two tone. It's rattle can duplicolor bedliner. I still have to do the other side and the top. Honestly, I think it looks like crap. The 80's faded SR5 stickers make it look horrible. I'm going to paint the rest another color of bedliner but green or tan.
Here's a close up of the texture....its a flat black
Here's a close up of the texture....its a flat black
Last edited by Adam F; 12-19-2006 at 12:12 PM.
12-19-2006, 01:39 PM
#20
Contributing Member
Join Date: Dec 2003
Location: Between a rock and a hard place, AZ
Posts: 3,659
Likes: 0
Received 0 Likes
on
0 Posts
