bed rubbing on cab
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: San Luis Obispo, California
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
bed rubbing on cab
Since i bought my truck i havent taken the bed liner out to see what it looked like underneath. So i did today, and i knew the bed was rubbing on the cab when im driving cause i hear it but im wondering if thereis a way to straiten out the back of the bed where it is supposed to be parallel to the cab. I know i could probably take off the bed and try to hammer it out. but im wondering if there is an alternative option rather than taking the bed off.
here are the pics
its kinda hard to tell from the pics but it is rubbing on the cab
thanks
Justin
here are the pics
its kinda hard to tell from the pics but it is rubbing on the cab
thanks
Justin
#2
Registered User
unbolt the bed so you can get a hook against the front of the bed, hook a come-along to the front of the bed against the cab, and a mounting hook in the bed, and start cranking.
Thread
Thread Starter
Forum
Replies
Last Post
nframe
3.4 Swaps
3
08-16-2015 09:03 AM
Backcountry411
86-95 Trucks & 4Runners (Build-Up Section)
4
07-24-2015 08:06 AM