4Runner seat and center console installed
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Sudbury ON Canada
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
4Runner seat and center console installed
Hey I did the bucket seat and center console install on the truck yesturday. Three of the four bolts lined up nice for the seat,only had to drill one. Arm rest and center console went in easy, just had to intall a bracket fron the runner.
Review:
The bucket sits a bit higher than the split bench but it is WAY MORE COMFORTABLE. The 5 way adjust is great and the extra cusion helps on the rough roads.
The center console has leather shifter boots and a few coin holders, a nice tray and underarm compartment that I will cut open and make A LOT bigger because there is no heater for the back. Now I have a place for the ARB switches when I can morgage for a rear locker.
So far Real GOOD.
Review:
The bucket sits a bit higher than the split bench but it is WAY MORE COMFORTABLE. The 5 way adjust is great and the extra cusion helps on the rough roads.
The center console has leather shifter boots and a few coin holders, a nice tray and underarm compartment that I will cut open and make A LOT bigger because there is no heater for the back. Now I have a place for the ARB switches when I can morgage for a rear locker.
So far Real GOOD.
Last edited by blueyoda; 07-12-2008 at 05:05 AM.
#2
Registered User
Thread Starter
Join Date: Nov 2006
Location: Sudbury ON Canada
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
After driving 200km yesterday I fully appreciate the bucket seat. No sore back or having to do stretches in the truck to stay loose. I would recomend this mod to everyone with a bench or split bench.
Thread
Thread Starter
Forum
Replies
Last Post
FS[SouthEast]: Mercury Villager Fan & DCC Fan Controller
coryc85
Misc Stuff (Vehicle Related)
6
09-09-2015 06:24 AM