myyota

It would be a great help to all of us here that when you post a question or ask for help or advice that you tell us what year, make, and model of truck or 4Runner that your working on. It gets very frustrating when someone asks a question and it doesn`t include the vehicle information. So please help us by including this information so we can help you.

Im posting this because it seems that not a day goes by that i read a post of someone asking for help with something and no vehicle information is included.

chuckleheadedness

ok, thanks for the lines up. I m newbie. Hello guys!

jtcessna

88 toyota efi, 3.0v6. i was getting a 3" body lift friday, can i install it and let my boot on my shifter go and drive and then weld the 3" spacers for the shifter? what im sayn is can i drive my truck to where i need to to weld if i just let the shifter sit in the hole

myyota

You should be able to drive it that way, as long as the shifter isn`t hitting anything.

jtcessna

thanks, so it should be fine driving it, with it out of the rubber boot? thanks again