Looking for bolt size on manual transmission fill plug...

Reply Subscribe

Thread Tools

Search this Thread

Oct 13, 2012 | 02:49 PM

#21

leetom101

Registered User

Joined: Oct 2012

Posts: 10

Likes: 0

Here is a better pic of the trans torex plug and the aft plug.

Attached Thumbnails

Looking for bolt size on manual transmission fill plug...-trans-photoa.png

Oct 13, 2012 | 03:54 PM

#22

rokblok

Registered User

iTrader: (1)

Joined: Feb 2011

Posts: 1,869

Likes: 3

From: The Dirty South

The fill plug is on the drivers side of the trans. G & W series. Yours can have either, depending on 2wd or 4wd, carb'd or fuel injected. No big deal. It's the big headed bolt to the right of that Torx bolt. Fill up to the bottom of that hole. The one with the question mark...

And from what I can gather, you have a G54 trans. I looked at my G52 in the shop to verify fill plug location, and yours is identical to mine. 22R engine? Carburetor?

Last edited by rokblok; Oct 13, 2012 at 04:05 PM.

Oct 13, 2012 | 04:01 PM

#23

leetom101

Registered User

Joined: Oct 2012

Posts: 10

Likes: 0

Awesome! Just to confirm, it's the bolt I have circled in the pic with a question mark?

Oct 13, 2012 | 04:07 PM

#24

rokblok

Registered User

iTrader: (1)

Joined: Feb 2011

Posts: 1,869

Likes: 3

From: The Dirty South

Correct. Question mark bolt is your trans fill plug.

Oct 13, 2012 | 07:15 PM

#25

ChefYota4x4

Registered User

iTrader: (5)

Joined: Jun 2009

Posts: 19,281

Likes: 20

From: Lake Havasu, AZ

Glad you got it, man.... Rokblok has the same series trans... Sweet

Looks a lil different than mine... But same side anyway, eh Rok? lol.

Last edited by ChefYota4x4; Oct 13, 2012 at 07:20 PM.

Oct 13, 2012 | 07:31 PM

#26

rokblok

Registered User

iTrader: (1)

Joined: Feb 2011

Posts: 1,869

Likes: 3

From: The Dirty South

Yeah my G52 that I blew up is sitting out in the shop. It's a little different than the W56B I put in its place. But at least it's on the same side... Lol