I was wondering if anybody knows how to do a deckplate mod or variation of it on a 1995 4Runner. Pictures would be extremely helpful

 

anyone?

 

https://www.yotatech.com/~corey/tech.../deckplate.htm

 

search and you will find other threads about the mod for a 2nd gen. From what i understand they are about the same

 

Since the 2nd Gens have a round airbox, there isn't really a "deckplate" mod. However there is an "Air box" mod. The short of it is: remove the pipe and plate from behind the headlight that go into the airbox. Then take a drill and make a whole lot of little holes in the bottem of the box.

There is a write up of it in the "tech write-up" section

 

hmm i wish this was pirate where we could have a ceremonial walking of the plank. Dude let me be the first to tell you to SEARCH there is tons of threads on this with a ton of pics

 

yeah, but it's not tuesday, so no newb jokes today

 

haha ya

 

ill be nice merry x-mas
https://www.yotatech.com/forums/f130/airbox-modification-3-0-v6-engine-75127/
https://www.yotatech.com/forums/f130/intake-silencer-removal-mod-2nd-gen-4runner-75167/

 

thanks for the help

 

Which motor?

Not that it really matters - neither the 22RE nor 3VZE are going to benefit much from it...

 

ill guess its a 3.0L

 

its the 3VZE

 

Dont worry about the deckplate mod for 2gen, Do the ISR, It makes a bigger difference.
THe airbox can already flow more then what the AFM can anyways, Yes I know K&N cone types can help but they also have a sacrafice of breathing hot air and letting more crap through to.