Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

Help with identifying suspension lift!!!

Old Aug 1, 2018 | 09:39 AM
  #1  
TurboJeep's Avatar
Thread Starter
Registered User
 
Joined: Aug 2018
Posts: 2
Likes: 0
Help with identifying suspension lift!!!

Hello all, I'm obviously new and this is my first post. New to Toyota's as well. I have a background in Jeeps and Currently own a 2006 Unlimited Rubicon with a mile long list of mods. I'm in the process of buying a 1989 Toyota 4x4 Pickup. I'm getting it from an older gentleman, and he doesn't know much about it. It has the V6 (not the 22re) with a 5 speed manual tranny. Going off the VIN I was able to figure out that it does have the bigger 8 inch rearend with 4.10 gears. It has a unknown suspension lift on it, said it was a 6 inch lift, and said it was installed in the early 1990's. All of the lift parts to include the shocks are orange in color. Anyone have any idea what brand lift this could be? I've done a search and haven't been able to find any info. A little more info that i have is that it has the manual locking hubs and has 309k miles on it. Supposedly timing belt has been changed 3 times as well as multiple other maintenance items have been replaced. Anything negative i need to know about these trucks that i meant need to look out for? Thanks for any help.
Reply
Old Aug 1, 2018 | 09:46 AM
  #2  
thefishguy77's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2011
Posts: 2,179
Likes: 62
From: sammamish, wa.
The 3.slow is a dog. Check the frame and undercarriage for rust. 8" rearend is standard for all 4x4 toyota trucks of the body style. 3.4 toyota swap is common and fairly easy now. Lots more power and same or better mileage. Your V6 tranny should handle the bigger motor as well. Most of these older rigs have been horrible neglected on maintenance. Not just timing belt and stuff like that. But the PITA stuff that no person likes to do.

When changing diff and tranny fluids always make sure you can fill them before draining them. Manual transmissions are usually easier to fill by pulling the shifter and adding fluid there vs pumping it it to the side of the transmission.

Just the tip of the iceberg but its a start.

Edit: 4:10 gears and bigger tires is going to be a dog to drive. Like all 4wd with bigger tires you should gear the differential to match.

Last edited by thefishguy77; Aug 1, 2018 at 09:49 AM.
Reply
Old Aug 1, 2018 | 09:50 AM
  #3  
TurboJeep's Avatar
Thread Starter
Registered User
 
Joined: Aug 2018
Posts: 2
Likes: 0
Ok, thanks, yea there isnt any rust on it anywhere. Its pretty clean for an '89, this guy took really good care of it. Any idea on the lift, i havnt been able to find one that was orange. It has 33's on it also.
Reply
Old Aug 1, 2018 | 10:06 AM
  #4  
old87yota's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2013
Posts: 3,112
Likes: 582
From: Portland, Oregon, USA
Can you post some photos up of your suspension?

Many different things may have been added or changed over the years, and photos would help us with identification.

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rhx
Newbie Tech Section
0
Nov 7, 2016 04:42 AM
shisha1999
84-85 Trucks & 4Runners
1
Feb 4, 2016 12:17 PM
TransAmBandit
86-95 Trucks & 4Runners
4
Nov 10, 2015 06:32 PM
Mr.Chumchal
86-95 Trucks & 4Runners
6
Apr 14, 2010 09:01 AM
412 designs
Offroad Tech
4
Feb 23, 2010 04:05 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:30 PM.