Help with gear swap needed
Apr 28, 2011 | 06:30 PM
#1
Thread Starter
Registered User
Joined: Apr 2011
Posts: 80
Likes: 0
From: Hamilton, MI
Help with gear swap needed
My next (planned) manuver with my pickup is to install lockers front and rear and to install new gears. Thinking 4:56 or 4:88's - not sure yet. Can anyone steer me to a good install thread for the gears? I have done ring and pinion set up before so it's not to me, just not in a Yota. Thanks
Apr 28, 2011 | 06:35 PM
#2
Registered User
Joined: Jan 2007
Posts: 6,106
Likes: 27
http://personal.utulsa.edu/~nathan-b...35differen.pdf
IFS w/o ADD http://personal.utulsa.edu/~nathan-b...23disassem.pdf, ADD http://personal.utulsa.edu/~nathan-b...le/24disas.pdf
FSM.
IFS w/o ADD http://personal.utulsa.edu/~nathan-b...23disassem.pdf, ADD http://personal.utulsa.edu/~nathan-b...le/24disas.pdf
FSM.
Last edited by MudHippy; Apr 28, 2011 at 06:42 PM.
Apr 30, 2011 | 03:54 AM
#3
Registered User
Joined: Nov 2004
Posts: 868
Likes: 1
From: Ameliasburgh, On. Ca.
Apr 30, 2011 | 07:55 AM
#4
At the bottom of this page, under "Gears and Traction Devices:"
- http://www.4x4wire.com/toyota/tech/
- http://www.4x4wire.com/toyota/tech/
Thread
Thread Starter
Forum
Replies
Last Post
