Is it possibly I will gain back any power from my new weber carb? I purchased the 32/36 dgev model. I have the stock 4.10 gears and Ive heard i should have no trouble at all pulling a set of 32X11.50's. its just sluggish right now on 225/75's, looking for answers.

 

The more gas/air flow you can get the more power your going to get. every little bit helps. Doing the exhaust will help to. If you ever pull the head off port the holes on the exhaust and intake and match them on the head. But over all I think regearing will help the most power wise

 

Exhaust has already been redone from the cat back if that helps any. Over all the truck has not had a hard life, dosnt even have 150,000 yet and its 25 years old.

 

Have you changed the carb yet?

 

Not yet no. Still brand new in the box, haven't had a decent day off work yet.

 

I think it will help. As long as you can get it jetted right and everything. Will it fit on the intake or do you have to modify it. I dont know much about the carbed yotas

 

This one came with a new filter air filter and everything in the box. Its a smaller chrome rectangle shaped one. Not sure how that's going to work out, guess ill find out soon enough. Id like to keep the old intake since it has that somewhat factory cold air intake design.

 

Hopefully it goes together well for you. Take some pics while you do it I would like to see lol

 

Ill do what I can, Dad and I will hopefully do it soon. It will for sure be a first for me.

 

I know on the nissans we had to do some modding to get them to fit

 

I appreciate the advice. Right now the plan is get it running just right, ball joint spacers, 2 inch blocks, and some 32's

 

That will look good. should deff post some pics. what tires you going for?

 

Im looking at the Cooper STT, Dunlop Mud Rover, or the BFG KM2.

 

Nice. so any update on the carbs?

 

Hopefully doing all that Sunday. Been working all week and start a new job on Saturday.

 

Nice. To Bad you dont live near oregon. I saw on Craigslist a nice set of tires and wheels today. they were 31s or 32s

 

Ha yeah im a good ways from Oregon.
Heres a pic of how it sits bone stock with 32x11.5's on 15x10 ultra wheels

 

Nice looks good. Looks like you need a little more room for tires. do they rub now?

 

Full turn yes. Hits the back of the fender.

 

Have you been on wabfab? They have alot of good stuff. like 2 inch lifts that would be perfect for your yota for the tires you want