hazE

4-5inch rough country lift what kind of leaf springs would level it out without using the blocks that were supplied with the kit? I'm looking at these springs http://www.allprooffroad.com/index.php?option=com_content&view=article&id=47

scuba

Allpro.. marlin.. trail gear.. chevy 63's... etc.

hazE

I get that but do I get the 4,5 or 6 inch lift springs. That's what confuses me

scuba

Well hmm. I'd go with the 5's.

hazE

Ok. Thanks

blake.nemitz

if you got a runner i would go an inch or two higher in the back so it doesnt sag, pickup same as front

hazE

It's a 89 pickup with the rough country 4-5 inch lift. That rear end is blocked with the supplied blocks I'm thinking I'll go with the 5 inch springs

Rob_A

You got pics or a write up on the lift install?

hazE

No sorry I dont. But I Was thinking of doing one for my gear swap.