DIRT CLOD

I had just posted this thread and it never showed up so Iam starting over.
As many know I have been yammering about a swap. Well the pig finally died so I have a dillema. I have found a 3.4 (5vz fe) 191k for $1000 including ECM, harness and exhaust manifolds, running strong ready to pull in a 2wd p/u... is the ECM going to work from 2wd to my 4x4... will i HAVE to have some body lift to make it fit?will the 3.4 bolt to my R150f?. is the install fairly simple considering? NEXT

I have found a very strong (stronger than I have seen before) 3vze 140k , I mean almost feels 3.4 strong, I thought it was gears but on the freeway its pulling 3000 revs same as mine at 70. anyway, I can get that for about the same.. now obviously the direct drop in would be easier but how much more difficult would the 3.4 be to drop in?... I can get the 3.4 w/o manifolds harness and ecm for about $650, should I grab the 3.4 and trade even for the 3.0 that he want a grand for?...ugghh... WHAT WOULD YOU DO?
I have all the tools neccessary to do the job just noone to help (noone that would be of help anyway) and am just wondering in this situation, WHAT WOULD YOU DO?
(by the way if anyone wants to help i have beer and pretzels...lol) I could make it worthwhile if someone was bored enough to come and help me complain while we install...lol

DIRT CLOD

How come everytime i try to create a thread it makes me log in again then i often dont find my thread published....

rattlewagon

https://www.yotatech.com/forums/f116...thread-203417/

This topic has been beat to death. Thats why they keep getting deleted.

Check the engine swap section.

DIRT CLOD

I understand about the topic being constant... but havent found anything on comparing and all the details without actually searching searching and looking looking ... its easy to just hope for replys on this thread... the beating of this topic is actually part of the problem...looking through pages and pages and pages for minute answers and huge answers as well....

DIRT CLOD

hmmm
very curious

waskillywabbit

iTrader: (-1)

3.0 is throw away motor. I've got numerous Toyota tech friends and my engine builder laughs at people who ask for a 3.0 rebuild or swap.

Spend the extra coin and do the 3.4

And yes this topic has been beat to death :deadhorse:

:wabbit2:

vital22re

iTrader: (2)

If you're not willing to search and look into what it takes and read other peoples 3.4 swap threads.. then you're not ready for a 3.4 swap. swap the 3.0 and keep driving.

DIRT CLOD

Just got frustrated with TOO much info, so i was trying to condense into this thread all knowledge of the gurus... found this link in a post here somwhere
THANK!!!

wii_tarded

There is a special section dedicated to the 3.4 swap. Read the stickies.