my buddy at work wants to lift his truck 4 inches to aleast to fit 33s and i have no clue who makes a lift for his truck. so if you guys could help me out it would be appricated thanks

 

can you get that 3+3 lift that is 3 body and 3 suspension ?

 

yea body lifts suck and i dispise them along with blocks in the rear

 

anything more than a 1" body lift as over 1" causes too many problems IMO.

 

got it, im a newb to the yotas so ill just take your word for it. looks like these trucks look pretty good with just 33s on them anyway. so i suppose there really isnt much need for more lift.

 

I have just a quick question about the Toytec lift. I'm looking to throw the OME 885's on my 07 DC SB with a 1" block in the rear. I've heard a handful of people complain about a bouncing front-end once they've added 2-2.5" spacers to the stock coils. Am I going to experience the same thing with the new coils or is the bouncing primarily due to a compressed stock coil?

 

You won't get nearly the same stiff/bouncy feeling with a new set of OME coils as you would with spacers. The OME's give a very nice ride, especially if you match them with a set of OME shocks (N140S).

For the rear, you might want to consider an Add-a-leaf instead of a block. It'll stiffen the rear either way, but I think you'll get better performance going the leaf route, and it's still pretty cheap.

 

Thanks man! That's what I wanted to hear