Write up on replacing heater core with A/C?
12-08-2011, 11:17 PM
#1
Write up on replacing heater core with A/C?
Just replaced the heater resistor and the blower motor. I still have two issues:
1) The fan seems to run pretty slow, even when on high speed.
2) There is barely any air coming out of any of the vents
I'm now feeling like I need to dig into the heater box itself to get to the flapper doors and replace the core while I'm at it. I've seen write ups and pics for non-a/c trucks, but mine has a/c.
As for the slow fan speed, I'm thinking the switch on the dash is the only thing left. I'm surprised how hard it is to find one however.
1) The fan seems to run pretty slow, even when on high speed.
2) There is barely any air coming out of any of the vents
I'm now feeling like I need to dig into the heater box itself to get to the flapper doors and replace the core while I'm at it. I've seen write ups and pics for non-a/c trucks, but mine has a/c.
As for the slow fan speed, I'm thinking the switch on the dash is the only thing left. I'm surprised how hard it is to find one however.
Thread
Thread Starter
Forum
Replies
Last Post
crashburnoveride
86-95 Trucks & 4Runners
1
07-10-2015 06:39 AM
