After replacing the input bearing, seals, and gaskets, I reassembled everything but I don't seem to have something lined up properly. I tried rowing through the gears before I threw it back in the truck and no joy. I can't remember if I had it in gear or neutral when I took it apart. I'm assuming it has to do with the gear and gear selector shaft alignment. Yes, I've searched. Help a noob out!

 

I'm not sure how this rod was installed when I tore it apart.

 

Figured it out. The lower shift fork notch is reverse and it has gotten pushed forward. Once I moved it in line with the other fork it all worked perfectly. Transmission is back in and working just fine.