trail gear shacklle and hanger
05-29-2014, 08:28 PM
#1
Registered User
Thread Starter
Join Date: Apr 2014
Location: north idaho
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
trail gear shacklle and hanger
Hey guys. i did a tg 3 inch sas a few months back. but i have a few questions. How tight am i supposed to tighten the shackle bolts? I have them tightened down, but the spacers that are between the shacklles and spring bushings seem to be cookie cutting the bushings. should i get washers that are the same diameter as the bushings to go in between the spacers and the bushings? And on the front spring hanger do i tighten the bolts enough to bend the ears and slightly compress the bushings?
05-30-2014, 05:50 AM
#2
Registered User
Join Date: Oct 2012
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys. i did a tg 3 inch sas a few months back. but i have a few questions. How tight am i supposed to tighten the shackle bolts? I have them tightened down, but the spacers that are between the shacklles and spring bushings seem to be cookie cutting the bushings. should i get washers that are the same diameter as the bushings to go in between the spacers and the bushings? And on the front spring hanger do i tighten the bolts enough to bend the ears and slightly compress the bushings?
Thread
Thread Starter
Forum
Replies
Last Post
XtraCab
Solid Axle Swaps, All Years
18
04-12-2020 05:25 AM
Backcountry411
86-95 Trucks & 4Runners (Build-Up Section)
4
07-24-2015 08:06 AM
