94toyota4x4

Im wanting to do the ex. cab swap to the truck in my avatar, its a 93 ex cab going on a 94 stnd, cab frame, would it be worth it and does anyone know a write up anywhere because on pirate the seach is down so Im having trouble finding it, if anyone here has done plese let me know how you did it, thanks.

bodo

Do you have a redstar on pirate?

tc

Will only work if you have a std cab longbed won't it?

Elton

i know EWAYota wanted to do the same thing pretty sure he made a thread about it

94toyota4x4

Its a stndrd, long bed so im good there where is his thread, located^

rockota

Search is not down on Pirate. At the top of each page is a thread explaining how to search.

The swap has been documented many times by people on 4x4wire and PBB for 2nd gen trucks, but I've never seen one for a 3rd gen. You will need to measure the cabs; there may be interference with the rear of the cab and fender well. Marlin has also done this swap - check out his site.

EWAYota

https://www.yotatech.com/forums/show...ended+cab+swap

Sonofmayhem

pirates faq has it for toyotas.

http://www.pirate4x4.com/forum/showthread.php?t=459180

suprathepeg

The method is the same with 2nd and 3rd gen trucks. Too bad you didn't have a short bed frame though then you could have the short wheelbase and xcab, now that is cool!

94toyota4x4

dude thats what I have a stand. cab frame, theres been a bed added the 93 x-cab is way longer than my 94 stnd, thats why Im doing the swap. Thanks for the threads