Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

something happened to my transmission

Old Jan 31, 2013 | 09:55 PM
  #1  
Ytasteyellowsnow's Avatar
Thread Starter
Registered User
 
Joined: Aug 2012
Posts: 53
Likes: 0
From: Phoenix az/ El paso,tx
something happened to my transmission

well got my new motor in everything running hunky dory and well as life goes, something happened to my transmission.. i was driving at about 40 mph gas it a little gas thru a light and heard a loud bang underneath and my truck redlined all of a sudden.. put it in nuetral and something in the transmission is still banging/clunking as the wheels turn.. putting it in gear the truck moves no where only revs up and whenever it is pushed /towed a horrible banging inside is heard andd gets faster with speed.. any ideas im getting ready to do a new clutch etc ordered the kit from JT outfitters but im wondering if this has happened to anyone else or if someone can provide some insight as to what i might see... thanks in advance

Last edited by Ytasteyellowsnow; Feb 3, 2013 at 08:49 PM.
Reply
Old Jan 31, 2013 | 10:07 PM
  #2  
justin_4runner's Avatar
Registered User
 
Joined: Dec 2010
Posts: 1,295
Likes: 1
From: tacoma wa
it sounds like a shaft on the inside of the trans has gone and broke, have u looked under to make sure that its not the rear drive line just banging around down there, i thinking that u are going to have to do more then just a clutch look for a trans to replace urs.
Reply
Old Feb 1, 2013 | 05:50 PM
  #3  
TrikeKid's Avatar
Registered User
 
Joined: Oct 2007
Posts: 606
Likes: 0
From: Roy, WA
Pull the drain plugs on the trans and t-case and see which one ˟˟˟˟s a ton of metal out, could be either one.
Reply
Old Feb 1, 2013 | 08:36 PM
  #4  
Ytasteyellowsnow's Avatar
Thread Starter
Registered User
 
Joined: Aug 2012
Posts: 53
Likes: 0
From: Phoenix az/ El paso,tx
transfer case works if i slip it in neutral the truck rolls without noise but once driveshaft is hooked up thru transfer csae it gets noisy
Reply
Old Feb 1, 2013 | 09:44 PM
  #5  
TrikeKid's Avatar
Registered User
 
Joined: Oct 2007
Posts: 606
Likes: 0
From: Roy, WA
Sounds like you've had yourself a catastrophic transmission failure. Time to hit up your local message boards and craigslist for another trans.
Reply
Old Feb 3, 2013 | 08:46 PM
  #6  
Ytasteyellowsnow's Avatar
Thread Starter
Registered User
 
Joined: Aug 2012
Posts: 53
Likes: 0
From: Phoenix az/ El paso,tx
shameless bump and does anyone have a w56 D i believe since im a 92 year if so gimme a price i dont really feel like shelling out another 1300 bucks plus core for a marlin, might get a used one and sell it, i hate to tho it has a brand new motor and cam and is super clean painted new 33s 4 inch lift 2 inch body nice rims system, lsd, etc any ideas on price guys or im interestedin trades i like 4 runners!!
Reply
Old Feb 3, 2013 | 09:01 PM
  #7  
Ytasteyellowsnow's Avatar
Thread Starter
Registered User
 
Joined: Aug 2012
Posts: 53
Likes: 0
From: Phoenix az/ El paso,tx
also how hard would it be to swap to a automatic? i only ask since my wife is 5 ft and she can barely reach the clutch
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
crammit442
95.5-2004 Tacomas & 96-2002 4Runners
7
Nov 29, 2017 12:30 PM
Wooddmiester
86-95 Trucks & 4Runners
1
Aug 11, 2015 07:42 PM
Dennisx2
86-95 Trucks & 4Runners
4
Aug 10, 2015 06:48 AM
Dennisx2
General Electrical & Lighting Related Topics
0
Aug 4, 2015 01:26 PM
yourrealdad
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 29, 2015 11:08 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 10:48 AM.