Requirements to replace rear exhaust side rocker arm?
Oct 24, 2018 | 09:51 AM
#1
Thread Starter
Registered User
Joined: Jan 2018
Posts: 89
Likes: 10
Requirements to replace rear exhaust side rocker arm?
A piece of my rear exhaust rocker arm chipped off, I found 1 piece which is about half of what chipped off (still trying to look around in the valve area for the other piece -_-
Anywho, is there a way I can just remove and replace the rear exhaust rocker arm without fully unbolting the head??
Anywho, is there a way I can just remove and replace the rear exhaust rocker arm without fully unbolting the head??
Oct 24, 2018 | 10:55 AM
#2
Registered User
Joined: Jun 2017
Posts: 2,436
Likes: 965
From: 02176
Is this a 4 cylinder?
I don't think it will work based upon personal experience. I did a cam swap once without replacing the head gasket and the 20R ran for about 100 miles before the head gasket let go.
I don't think it will work based upon personal experience. I did a cam swap once without replacing the head gasket and the 20R ran for about 100 miles before the head gasket let go.
Oct 24, 2018 | 12:15 PM
#3
No way to remove the rockers or cam without removing the head bolts. Some people have tried some hokey methods to hold the head down while the rocker assembly is removed. I wouldn't trust it. Kind of a crappy setup how that all works but it's what we have.
Thread
Thread Starter
Forum
Replies
Last Post
maddevildog
86-95 Trucks & 4Runners
7
Nov 10, 2014 10:18 AM
jungle_runner
86-95 Trucks & 4Runners
12
Sep 24, 2007 12:10 AM
HurleyBoy
95.5-2004 Tacomas & 96-2002 4Runners
4
Oct 28, 2003 10:07 AM
