Receiver Bolts.. What size?
#1
Contributing Member
Thread Starter
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes
on
2 Posts
Receiver Bolts.. What size?
I hate to ask, but I haven't been able to nail anything down in the last few months.. I have a class III receiver I want to put on my truck, and I'd like to buy the bolts this week. what size/length/grade should I use?
thanks YT!
-Clint
thanks YT!
-Clint
#4
Contributing Member
Thread Starter
Join Date: Jun 2007
Location: Where it always works if you work it, in Sunny Selinsgrove, PA
Posts: 2,336
Likes: 0
Received 2 Likes
on
2 Posts
ok, got the hitch on, works great, though my truck didn't pull the MR2 so well haha.
just for reference, in case someone would be looking for this information, I used the following hardware:
(2) 1/2" x 3 1/2" Bolts
(4) 1/2" x 1 1/2" Bolts
(6) 1/2" Nuts
(12) 1/2" Flat Washers
every bolt was just the right size, and I am really pleased with how everything worked out.
just for reference, in case someone would be looking for this information, I used the following hardware:
(2) 1/2" x 3 1/2" Bolts
(4) 1/2" x 1 1/2" Bolts
(6) 1/2" Nuts
(12) 1/2" Flat Washers
every bolt was just the right size, and I am really pleased with how everything worked out.
Thread
Thread Starter
Forum
Replies
Last Post
smilen724
86-95 Trucks & 4Runners (Build-Up Section)
13
11-08-2015 04:11 PM
bryan34w
Buying & Selling Advice - Feeler/Gauging Interest
12
09-30-2015 02:50 PM