I think I asked this question in a previous thread, but I do believe it got burtied somewhere in the thread.

Reason I'm asking is that JCWhitney has them for around 130 bucks a spring with free shipping.

1. Will these springs fit my 89 4runner (catalog only lists from 84-89).

2. Anybody have first hand experience with these springs?

Thanks.

vmax84

 

http://www.jcwhitney.com/autoparts/P...8+1988/c-10101

 

Can't speak to the JC Whitney stuff but heres a link to an old thread regarding my solution. I also remember that there are 2 different widths of springs but I don't remember the cut off of years or if it was a runner vs Taco thing. Any way I went with the Downey springs strictly on price. I have had no problem with mine but some folks on this board have, so you might want to search that a little.

https://www.yotatech.com/forums/f2/new-rear-leafs-installed-48400/

Good luck and feel free to ask any Q's
Mike

 

Thanks a lot......I have to get to work, but will touch base again on this.

vmax84

 

Called Downey on a 2 inch lift, new leaf springs. 187 bucks plus shipping. Guy was real easy to deal with.

Now need to figure out how to let the wifey let me order them!!

vmax84

 

I would say since it's the same generation,and very little has changed in this generation that the springs should fit...but me i'm going the cheap way with add-a-leafs...hope to do that this Febuary vaction... don't worry i'll take pics...
4Runners were mean to be topless...