Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Post Your Pics!!!

Thread Tools
 
Search this Thread
 
Old Mar 12, 2011 | 06:59 PM
  #6741  
Wheelindealin's Avatar
Registered User
 
Joined: Jun 2010
Posts: 203
Likes: 0
From: Morganton, NC
Originally Posted by baddest94
I would go with the black cragers with those new bfg's would look great always liked the white and black setup on any truck
Yes. black black black black... black
Reply
Old Mar 13, 2011 | 05:44 AM
  #6742  
Oldfart's Avatar
Registered User
 
Joined: Nov 2010
Posts: 24
Likes: 0
From: Mobile Alabama
Originally Posted by FastLane1000
No problem. If I can find a part number without unbolting them I will. It may be tomorrow. The cool thing about the u-pull-it is finding something that you like. There are lots of good looking seats out there and I would bet most could be fitted relatively easy. I am happy with these and did want something with a lumbar adjustment which these have. they do sit up high though and I don't recommend them if you are over 5'10. I did hammer in the transmission tunnel a little to fit the front inside part of the seat.
I had the same problem in my 89 4runner. The 94 4runner SR5 seats bolted right up but put me sitting to high and to close to the steering wheel not near enough leg room so I went back to the seats that came in it. I put them in my 86 2wd pu and have enough leg room but they sit a little to high for me.
Reply
Old Mar 13, 2011 | 10:17 AM
  #6743  
ChefYota4x4's Avatar
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
I guess being around 6', ....I'd better rethink this then, eh? hahaha. Thanks for the input. Maybe the Mustang Seats, or something more low profile, like Ian did, ....that might be more conducive to a 'comfy-non-top'o'head'banging' ride, eh? hahaha. I might just have my seats done, after all is said and done.

PS> I have a guy here in Torrance, CA, (Torrance Upholstery), ....he did a great job on my console(made it higher and gray leather to match, etc., ....and he's been there 30 years or something. Gonna find out what he wants to do my Driver seat and I'll report back.

PS> How's it been, Old Fart? Hot and Humid yet in Bama'Jamma?
Reply
Old Mar 13, 2011 | 12:42 PM
  #6744  
tpaine14's Avatar
Registered User
 
Joined: Feb 2010
Posts: 174
Likes: 0
From: Maine
Name:  yotaphoto2.jpg
Views: 152
Size:  105.3 KB

Name:  yotaphoto.jpg
Views: 162
Size:  51.2 KB
Reply
Old Mar 13, 2011 | 12:58 PM
  #6745  
Diablo22RE's Avatar
Registered User
 
Joined: Feb 2011
Posts: 564
Likes: 0
From: Georgia
I finally fixed my Aisin Hub Switch and took my Toyota on a trail for the first time. Can't wait to go on some more, these Toyotas are loads of fun.

Reply
Old Mar 13, 2011 | 01:16 PM
  #6746  
Oldfart's Avatar
Registered User
 
Joined: Nov 2010
Posts: 24
Likes: 0
From: Mobile Alabama
Originally Posted by ChefYota4x4
I guess being around 6', ....I'd better rethink this then, eh? hahaha. Thanks for the input. Maybe the Mustang Seats, or something more low profile, like Ian did, ....that might be more conducive to a 'comfy-non-top'o'head'banging' ride, eh? hahaha. I might just have my seats done, after all is said and done.

PS> I have a guy here in Torrance, CA, (Torrance Upholstery), ....he did a great job on my console(made it higher and gray leather to match, etc., ....and he's been there 30 years or something. Gonna find out what he wants to do my Driver seat and I'll report back.

PS> How's it been, Old Fart? Hot and Humid yet in Bama'Jamma?
Nov. Dec. Jan and the first half of Feb. were colder than a well diggers butt in Jan then Spring hit mid Feb. Pollen everywhere now Azaleas starting to bloom and lots of other things. Been running the heat at night and the AC in the day.
Reply
Old Mar 13, 2011 | 01:48 PM
  #6747  
rattlewagon's Avatar
Registered User
15 Year Member
Liked
 
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
Originally Posted by tpaine14


This looks like a fun time! Nice pics!
Reply
Old Mar 13, 2011 | 01:53 PM
  #6748  
tpaine14's Avatar
Registered User
 
Joined: Feb 2010
Posts: 174
Likes: 0
From: Maine
thanks re re. I got to pull out a 12 valve, long bed, extra cab cummins in the same area. my trucks parked for the time being though :/
Reply
Old Mar 13, 2011 | 05:14 PM
  #6749  
4runner_guy's Avatar
Registered User
 
Joined: Jul 2010
Posts: 184
Likes: 0
From: Fresno, Ca
As promised, I swapped the tires and wheels, polished the wheels as best as I could. I think that my truck looks more aggressive with this setup...overall, I'm very happy!
Name:  IMG_1370.jpg
Views: 153
Size:  87.1 KB
Name:  IMG_1372.jpg
Views: 155
Size:  76.1 KB
Name:  IMG_1373.jpg
Views: 177
Size:  79.7 KB
Name:  IMG_1374.jpg
Views: 154
Size:  68.9 KB
Name:  IMG_1371.jpg
Views: 163
Size:  80.5 KB
Reply
Old Mar 13, 2011 | 05:57 PM
  #6750  
Bigyota1989's Avatar
Registered User
 
Joined: Jun 2010
Posts: 232
Likes: 0
From: ct
a couple poser pics from wheeiling today!

Reply
Old Mar 13, 2011 | 06:43 PM
  #6751  
streetlancer's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2007
Posts: 800
Likes: 0
From: VA
Ahh...its been a while since i last logged in. Been missing out on too many sweet rigs!! Keep up the great work!!

Just a little taste of my most recent acquisition:

Name:  DSC05122.jpg
Views: 160
Size:  125.3 KB

Name:  DSC05124.jpg
Views: 141
Size:  97.4 KB

The original plan was to swap over the 4:88s to the pickup and part out the rest, but IDK, its kinda grown on me.
Reply
Old Mar 13, 2011 | 10:14 PM
  #6752  
ChefYota4x4's Avatar
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Originally Posted by 4runner_guy
As promised, I swapped the tires and wheels, polished the wheels as best as I could. I think that my truck looks more aggressive with this setup...overall, I'm very happy!




Ahhhh, love it, man! Something about the Outlaw2's! Looks great!
Reply
Old Mar 13, 2011 | 10:14 PM
  #6753  
ChefYota4x4's Avatar
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Nice find, Lancer, ... how you been, man? Old red still around? lol.
Reply
Old Mar 13, 2011 | 10:27 PM
  #6754  
streetlancer's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2007
Posts: 800
Likes: 0
From: VA
You bet Chef... she's still ticking and holds seniority around here.
Me, I've been good, busy, but good. I see youve gone and made everyone hungry with your dishes!! LOL. They look delicious!!
Reply
Old Mar 13, 2011 | 10:32 PM
  #6755  
ChefYota4x4's Avatar
Registered User
iTrader: (5)
 
Joined: Jun 2009
Posts: 19,281
Likes: 20
From: Lake Havasu, AZ
Sweet, Lancer! Was worried.... Now, you're not going to go toooo crazy with the red spray can again, are ya? lol. that's a REALLY clean 4dr, buddy! Love that Red, too! Was actually thinking of painting mine that color if I ever do repaint it, lol. My orig. is still holding on, lol. Have a good'n, bud!
Reply
Old Mar 13, 2011 | 10:42 PM
  #6756  
streetlancer's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2007
Posts: 800
Likes: 0
From: VA
Nah... not this time. LOL. I will try to restrain myself, hah.
X2 on the paint, its a nice shade of red. I saw a member on here with the same colored runner cleaned up and it looks amazing in the sun.

Your 4runner looks great as always!! Keep it up!
Reply
Old Mar 13, 2011 | 10:54 PM
  #6757  
steve425's Avatar
Registered User
 
Joined: Mar 2010
Posts: 7
Likes: 0
Snow Accumulation

The old boy's been sittin' in the driveway of our mountain home for a couple weeks. Anyone got an ice scraper?

Name:  IMG_2561.jpg
Views: 172
Size:  87.8 KB
Reply
Old Mar 13, 2011 | 11:27 PM
  #6758  
baddest94's Avatar
Registered User
 
Joined: Jan 2011
Posts: 353
Likes: 0
From: va
Originally Posted by 4runner_guy
As promised, I swapped the tires and wheels, polished the wheels as best as I could. I think that my truck looks more aggressive with this setup...overall, I'm very happy!




Hey did you use the powerball? If so what did ya think of it? Either way man those owtlaws turned out great look really good with the new shoes think those will be my next set love the tread pattern. How are there on road manners they look like they could do a num offroad lol.
Reply
Old Mar 13, 2011 | 11:32 PM
  #6759  
1981 yota's Avatar
Registered User
 
Joined: Jul 2009
Posts: 1,639
Likes: 4
From: Cle Elum washington
Originally Posted by steve425
The old boy's been sittin' in the driveway of our mountain home for a couple weeks. Anyone got an ice scraper?

by any chance is your mountain home around Cle Elum WA?
i noticed the plates there
Reply
Old Mar 14, 2011 | 12:21 AM
  #6760  
steve425's Avatar
Registered User
 
Joined: Mar 2010
Posts: 7
Likes: 0
Near Hyak
Reply



All times are GMT -8. The time now is 03:56 PM.