Parting out 86 4Runner
#1
Thread Starter
Registered User
Joined: Jan 2005
Posts: 145
Likes: 0
From: On the dark side of the moon
Parting out 86 4Runner
I think the only way to get some of my money back on this truck is to break it down and sell it off.
- 4.88 gears OEM/ entire carrier - 600
- 22R Motor with 3200 miles - 700
- Tranny/ Clutch/ T-case with less
than 100 miles on all -1000
- SkyJacker 4" box front Lift
installed and never used - 500
- Rear 5" lift from Wabfab Offroad
installed and never used - 500
- 4 almost new CV's - 50 ea.
- Brand new Billstines 12" rear - 60
- Front post top Bill's new for front - 60
(both front and rear stanless steel finnish)
- Tach for SR5 - 30
- Doors Driver side - 40
- Passenger side has dent - 20
- New rotors and brakes for front- 50ea.
- Aisin Hubs - 190 for the pair
- Simi new Radiator - 45
- Winch Mount from WabFab Offroad - 95
- Rear Axles with new Bearings and seals - 180
- Mass Air - 200
- 3" Smitty Built Nurf Bars - 150 pair
- 3" Smitty Built rear bumper - 150
- Bikini top kit - 75
There is more than I can think of right now. If there is anything else that you could want let me know. Almost everything on this truck is new. I hate to part it out but it seems the only way to get some of the money out of it. If some one would like the whole truck let me know. Make a reasonable offer.
The truck is in great shape and has rust in two spots. next to the gas door and above the drivers side fender. I would love to keep it on one hand... but the other says to sell. Thanks for looking.
Also buyer is responsable for shipping. and looking up shipping costs from 38655.
- 4.88 gears OEM/ entire carrier - 600
- 22R Motor with 3200 miles - 700
- Tranny/ Clutch/ T-case with less
than 100 miles on all -1000
- SkyJacker 4" box front Lift
installed and never used - 500
- Rear 5" lift from Wabfab Offroad
installed and never used - 500
- 4 almost new CV's - 50 ea.
- Brand new Billstines 12" rear - 60
- Front post top Bill's new for front - 60
(both front and rear stanless steel finnish)
- Tach for SR5 - 30
- Doors Driver side - 40
- Passenger side has dent - 20
- New rotors and brakes for front- 50ea.
- Aisin Hubs - 190 for the pair
- Simi new Radiator - 45
- Winch Mount from WabFab Offroad - 95
- Rear Axles with new Bearings and seals - 180
- Mass Air - 200
- 3" Smitty Built Nurf Bars - 150 pair
- 3" Smitty Built rear bumper - 150
- Bikini top kit - 75
There is more than I can think of right now. If there is anything else that you could want let me know. Almost everything on this truck is new. I hate to part it out but it seems the only way to get some of the money out of it. If some one would like the whole truck let me know. Make a reasonable offer.
The truck is in great shape and has rust in two spots. next to the gas door and above the drivers side fender. I would love to keep it on one hand... but the other says to sell. Thanks for looking.
Also buyer is responsable for shipping. and looking up shipping costs from 38655.
#6
Thread Starter
Registered User
Joined: Jan 2005
Posts: 145
Likes: 0
From: On the dark side of the moon
There are alot of pictures under Chandler's 86 in the members rig section. The Bikini top is the mount and bow. I put the soft top on my jeep. it's just for the hardware only. The cheepest place I have found the Bestop bikini is at windrockoffroad.com.
Also the interior is grey. the seats all have covers over them cause the fabric is pretty beat up. the dash is new and has no cracks or peeling.
Also the interior is grey. the seats all have covers over them cause the fabric is pretty beat up. the dash is new and has no cracks or peeling.
Trending Topics
#9
Thread Starter
Registered User
Joined: Jan 2005
Posts: 145
Likes: 0
From: On the dark side of the moon
have stock wheels painted black with dunlop mudterrains 31x10.50r15 . I sold the 35's and rims. I have the side marker lights next to the headlights but not the ones in the bumper.
#10
how much for the dash (minus the instruments) - just the pad and the metal beneath it. You said it's not cracked or stained, right?
also looking for the little plastic strips that run up the interior of the tailgate (hold in the plastic sides of the bed)
Thanks,
Phil
also looking for the little plastic strips that run up the interior of the tailgate (hold in the plastic sides of the bed)
Thanks,
Phil
#11
also looking for the plastic surrond for the shifter (that holds the leather in). What shape is the leather shift boot in?
ALSO, the lower part of the drivers side dash, with the speaker cover, as long as it is not bent and or cracked
Wow... my mind is racing as to what else I need!!
Thanks,
Phil
ALSO, the lower part of the drivers side dash, with the speaker cover, as long as it is not bent and or cracked
Wow... my mind is racing as to what else I need!!
Thanks,
Phil
#12
also looking for the plastic surrond for the shifter (that holds the leather in). What shape is the leather shift boot in?
ALSO, the lower part of the drivers side dash, with the speaker cover, as long as it is not bent and or cracked
Wow... my mind is racing as to what else I need!!
Thanks,
Phil
ALSO, the lower part of the drivers side dash, with the speaker cover, as long as it is not bent and or cracked
Wow... my mind is racing as to what else I need!!
Thanks,
Phil
#15
How much does that Rear Bumper weigh? What shipping method do you plan on using - UPS Ground? I might be interested in that Rear Bumper. Does that Bikini Top Kit also contain the Bikini, or just the Mounting stuff?
Last edited by RiNkY; Jul 5, 2007 at 10:14 AM.
#16
#17
Thread Starter
Registered User
Joined: Jan 2005
Posts: 145
Likes: 0
From: On the dark side of the moon
and I'll have to check on the plastic strips
#20
PM me once you find out about the strips. The duct tape should come off with some scrubbing I suppose, eh?


