New rims and tires installed.
#1
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
New rims and tires installed.
So I went and picked up my new tires today.
33x12.50" BFG mud terrains on 15x8.5" steelies that I spray bombed black.
I hardly noticed much of a difference going from 32" tires to the 33" mudder, but it has made my rig look ALOT better!
I have to trim my lower valance, I rub about a 1/4" of the ends
What do ya'll think?
Oh and just for fun, we mocked up my roll/light bar, I think it completes the look of the truck!
My friend being a doofus
33x12.50" BFG mud terrains on 15x8.5" steelies that I spray bombed black.
I hardly noticed much of a difference going from 32" tires to the 33" mudder, but it has made my rig look ALOT better!
I have to trim my lower valance, I rub about a 1/4" of the ends
What do ya'll think?
Oh and just for fun, we mocked up my roll/light bar, I think it completes the look of the truck!
My friend being a doofus
#2
Registered User
...nice man, well do you want to trade it for my stock 31" alluminum alloy w/ tire? j/k man I'm also looking for some 33" and it will be BFG all terrian or M/T but I don't really go mud driving so I might just get the A/T, and how much total cost for your tire and rims?
Last edited by Guardian_Saint; 07-31-2007 at 04:40 PM.
#3
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
haha! I gotta unload my old rims + tires heh
Rims where 120 bucks used. (needed paint BAD)
Tires came to 1190.00 after everything. He quoted me 1057.00 when I called though, so I was a little pissed off.
Rims where 120 bucks used. (needed paint BAD)
Tires came to 1190.00 after everything. He quoted me 1057.00 when I called though, so I was a little pissed off.
#7
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
I like the white wall look
yeah I have to be carefull now!
I Seem to have some more rubbing issues!
I went up to a driveway to turn around and BZZZZZZZZZZZZZZZZZ!
when turning and hitting a bump my tires hit the back of my fenders!!
ahh!
I guess I have to be realllly slow when turning and going over bumps untill I can get some bj spacers to get a little more front lift DANG!
yeah I have to be carefull now!
I Seem to have some more rubbing issues!
I went up to a driveway to turn around and BZZZZZZZZZZZZZZZZZ!
when turning and hitting a bump my tires hit the back of my fenders!!
ahh!
I guess I have to be realllly slow when turning and going over bumps untill I can get some bj spacers to get a little more front lift DANG!
Trending Topics
#8
Registered User
those look great. i just bought the same ones and also went with a black wheel. i will post up some action picts this weekend. so far mine have been great and no nicks or cuts in any of the tread
#9
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
sweet
So im thinking I have to either:
A back off the steering stops to prevent full lock + compression rubbing
B Crank t-bars a little to avoid said rubbing
C get bj spacers to avoid said rubbing.
Agh! I have to get an alingment next week so I dont mess up these purdy tires, so it looks like if I do any messing around with the t-bars I will have to get another one!! 100 bucks a pop
So im thinking I have to either:
A back off the steering stops to prevent full lock + compression rubbing
B Crank t-bars a little to avoid said rubbing
C get bj spacers to avoid said rubbing.
Agh! I have to get an alingment next week so I dont mess up these purdy tires, so it looks like if I do any messing around with the t-bars I will have to get another one!! 100 bucks a pop
#13
Registered User
Ahh you live in Maple Ridge you do not need them
Looks good man, be care full with the BJ spacers they work great but are beating the hell out of my steering. 4 idler arms in 4 months!!
Jeremy
#14
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
4!! time for chromoly one!!
Maple ridge is gettin pretty damn bad, I looked out the window one night just to see some s pulling away in my sisters chevy.
I had the lights on and was 50ft away! they are gettin pretty gutsy!
Did you install the bj spacers yourself "wheelin noob" ?
Maple ridge is gettin pretty damn bad, I looked out the window one night just to see some s pulling away in my sisters chevy.
I had the lights on and was 50ft away! they are gettin pretty gutsy!
Did you install the bj spacers yourself "wheelin noob" ?
#15
Registered User
Join Date: Jan 2006
Location: Rocklin Cali
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
#18
Contributing Member
Thread Starter
Join Date: Feb 2007
Location: maple ridge, British Columbia, Canada
Posts: 9,055
Likes: 0
Received 9 Likes
on
5 Posts
I was going to order the 1.5" BJ spacers Directly from SDORI since he is the one who manufactures them.
Thanks for the comments, I LOVE the way she looks now
I think it will look almost complete with
1. light bar with lights
2. rear bumper
3. front lights
4. new paint!!
Thanks for the comments, I LOVE the way she looks now
I think it will look almost complete with
1. light bar with lights
2. rear bumper
3. front lights
4. new paint!!
#19
Registered User
4!! time for chromoly one!!
Maple ridge is gettin pretty damn bad, I looked out the window one night just to see some s pulling away in my sisters chevy.
I had the lights on and was 50ft away! they are gettin pretty gutsy!
Did you install the bj spacers yourself "wheelin noob" ?
Maple ridge is gettin pretty damn bad, I looked out the window one night just to see some s pulling away in my sisters chevy.
I had the lights on and was 50ft away! they are gettin pretty gutsy!
Did you install the bj spacers yourself "wheelin noob" ?
Yes I did there easy, I just do not know why I have killed 4 Idlers since installing them.
Let me know if you have any questions.
Jeremy
#20
Registered User
holy crap jay! you truck looks great!!
couple questions..
how much backspacing on the rims?
what did you do about the transfer case shifter? did you get the 4crawler short throw kit?
thanks!
couple questions..
how much backspacing on the rims?
what did you do about the transfer case shifter? did you get the 4crawler short throw kit?
thanks!