I have a 91 4 runner and i got coil springs in the back but it sounds like some have leaf springs... Or do people switch over to leaf.. All so I am going to replace all the shocks and coil springs.. I was thinking of cranking the torsion bars up 2 inch and putting 2 inch spacers in the back is that a good idea.... Or should i just wait till i do the 4 inch lift but that is not for a couple of years....

 

84-89 have leafs from the factory, 90+ have coils. leafs are commonly swapped in when doing a SAS.


instead of tbar crank and spacer search for BJ spacers and LC coils

 

Save your money and it all at once. Coil spring trucks need trailing arm work when adding a lift.;