Jetting, Weber for 5,000 ft and up
09-08-2016, 11:24 AM
#1
Registered User
Thread Starter
Join Date: Sep 2016
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Jetting, Weber for 5,000 ft and up
I just bought an 87 Toyota pickup with a pre-85 22R in it. I'm swapping the stock carb to this Weber http://www.ebay.com/itm/151724482599 . Those who have this set up and live above 5000 ft, what jetting set up did you go with?
Last edited by chucknbach; 09-08-2016 at 11:25 AM.
09-11-2016, 10:33 AM
#3
Registered User
Trial and error may be the way to go.
Find what jets are in your carb, run it and see what issues you have.
Very likely you'll have to go smaller to make it right.
'Bout the only thing I can say is to make changes in the smallest increments possible.
Most folks know little about carbs anymore.
Maybe the carb sellers have some high altitude tuning info to give you.
Find what jets are in your carb, run it and see what issues you have.
Very likely you'll have to go smaller to make it right.
'Bout the only thing I can say is to make changes in the smallest increments possible.
Most folks know little about carbs anymore.
Maybe the carb sellers have some high altitude tuning info to give you.
09-11-2016, 01:02 PM
#4
Registered User
Thread Starter
Join Date: Sep 2016
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
First off, I'm lazy and cheap. I didn't want to buy the whole jet kit for $60. Was hoping for someone eles's set up that did all the experimenting as my starting point. Thanks for the reply, though.
Thread
Thread Starter
Forum
Replies
Last Post
80s Rule
Pre 84 Trucks (Build-Up Section)
44
01-05-2019 10:04 PM
FS[MidWest]: 1992 Toyota Pickup $4,000 OBO
adamhairfield
Vehicles - Trailers (Complete)
1
06-17-2016 11:57 AM
