Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

high NO reading and GETTING higher

Thread Tools
 
Search this Thread
 
Old Nov 19, 2007 | 10:44 AM
  #1  
swaycleveland's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 383
Likes: 0
From: north ridgeville ohio
high NO reading and GETTING higher

ive about had it ! everything i do majkes the readings go up !! wtf?
ive readed blogs for days done everything i can think of with the exception of timing
my NO reading is 1203
passing is 956
i started at a 1049 new pcv
new egr
new plugs new wires cap roter
cat and muffler are new
oil is fresh
all with 2 weeks
anyone got anything?????????????????? help
Reply
Old Nov 19, 2007 | 10:57 AM
  #2  
8yota9's Avatar
Registered User
 
Joined: Dec 2006
Posts: 190
Likes: 0
From: North NJ
Private garage $100 for a 2 year sticker..well thats what i got.
Reply
Old Nov 19, 2007 | 02:27 PM
  #3  
elripster's Avatar
Registered User
 
Joined: Feb 2004
Posts: 1,352
Likes: 3
From: Plainfield, IL
Something is not working. It's time to not assume that which is new is good.

First off, with numbers that high I would seriously question the cat. You can point one of those infrared thermometers (Radioshack has em but I'd try to borrow one, they are about $50) at the cat and I believe it should be around 50-100 degrees hotter on the outlet than on the inlet. If the inlet/outlet temps are the same, it is bad.

Just curious, but what do your HC's look like? Are they high but passing?

If you aren't throwing a code 71 then likely the egr is working correctly.

Bad timing, plugs, and such will raise numbers, but they should not cause a failure of that magnitude.

Frank
Reply
Old Nov 19, 2007 | 02:38 PM
  #4  
swaycleveland's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 383
Likes: 0
From: north ridgeville ohio
frank the cat is 5 days old lol im thinkin thats not it right now im down to timing (which will e checked tomorrow) and c4
Reply
Old Nov 19, 2007 | 02:39 PM
  #5  
swaycleveland's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 383
Likes: 0
From: north ridgeville ohio
by the way the other readings are just fine up and down a point or 2 ( which i thought might lead me in one direction or another but i cant make heads or tails of it)
Reply
Old Nov 19, 2007 | 03:06 PM
  #6  
mt_goat's Avatar
Contributing Member
 
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
Originally Posted by swaycleveland
frank the cat is 5 days old lol im thinkin thats not it right now im down to timing (which will e checked tomorrow) and c4
Is it one of those $60 aftermarket cats? The factory cat on those early years were packed with expensive metals, I got $140 at the scrap metal recycling place for my old 93 cat. I don't see how one of those cheap cats could work as good as the original did, maybe you need to run 2 of them like the newer trucks do. I know my 2001 5VZ ECU didn't like one $60 cat at all, it threw a P0420 code about every other day. But running 2 cats is suppost to satisfy it.

Last edited by mt_goat; Nov 19, 2007 at 03:11 PM.
Reply
Old Nov 19, 2007 | 03:08 PM
  #7  
swaycleveland's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 383
Likes: 0
From: north ridgeville ohio
lol nope it was a factory replacement i spent all the money!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
calderp
Engine Swaps
2
Aug 16, 2016 05:15 PM
RatOmeter
86-95 Trucks & 4Runners
15
Oct 22, 2015 03:17 PM
calderp
Pre 84 Trucks
8
Jul 27, 2015 09:58 AM
greenbuggy
3.4 Swaps
4
Jul 23, 2015 11:51 AM
garagespace
86-95 Trucks & 4Runners
0
Jul 9, 2015 08:37 AM




All times are GMT -8. The time now is 05:52 PM.