high beams don't work?
Nov 1, 2006 | 07:07 PM
#1
Thread Starter
Registered User
Joined: Mar 2006
Posts: 49
Likes: 0
From: Innisfail,Alberta
high beams don't work?
on my 894runner the high beams don't work if you flip the lever forward but they work if you pull it back- to flash them.The dash indicator light comes on but no brights.Is it the switch?Seems strange that it would turn on the indicator but not the lights themselves. Oh and my back window only works when the headlights are off.The electical system is haunted on this truck.Any ideas?
Nov 2, 2006 | 03:45 AM
#3
Contributing Member
Joined: Oct 2004
Posts: 271
Likes: 0
From: Oswego County, NY (no, not near NYC)
Actually, it could be the switch (in the stalk). According to what I read somewhere on 4crawlers site, the high beam indicator gets fed from the low beam circuit, not the high beams.
Nov 2, 2006 | 09:56 AM
#4
Yep, check the switch:
- http://www.4crawler.com/4x4/CheapTri...eadlight_Combo
And as noted, the "high beam" indicator is more of a "low beams not on" light:
- http://www.4crawler.com/4x4/CheapTri...eadlight_Combo
And as noted, the "high beam" indicator is more of a "low beams not on" light:
Last edited by 4Crawler; Nov 2, 2006 at 09:58 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Scotttekoch
General Electrical & Lighting Related Topics
23
Nov 1, 2021 12:41 PM
aciorba23
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
1
Jun 29, 2015 04:18 PM
LSUMatt1514
95.5-2004 Tacomas & 96-2002 4Runners
3
Jun 26, 2002 05:03 AM
