So, long story short I high centered on a stump in a logging field and it bent my sway bar to hell into my front drive line + some. I torched it out and got rid of all the parts it had. After words it got rid of the clunking sound and all is good.

However I don't like how it sways at 60+ mph at all so I was wondering if I can salvage a sway bar off another 1991 toyota pickup at a scrap yard if it will work? Or do I have to buy a brand new one and the accessory parts at $225?

 

I'd think a salvage yard one will work, might be a good idea to replace the bushings in it though.

 

The bar itself is about $120 http://www.toyotapartsoverstock.com/...rimLevel=18292, and I agree with JasonYota that a salvage one should be fine. I wouldn't re-use any of the accessory parts (bushings, washers, bolts), but they are all easily available after-market for not much money.

 

Junk yard
90-95 4Runner and 89-95 PU

 

I've got a couple laying around I don't use anymore :-) Drive to Arkansas, and it's yours.

 

I wish!! I'm in North Idaho haha