Cold start temperature switch - interchangable?
Dec 29, 2013 | 04:20 PM
#1
Thread Starter
Registered User
Joined: Aug 2013
Posts: 18
Likes: 0
Cold start temperature switch - interchangable?
Hi all
I have my coolant drained right now so I wanted to take out my temp sensors and give them a clean. Of course, the larger one, the cold start temperature switch/timer sheared off as I torqued it back in. Part number is 89462-20040 . I did some searching and it seems like there aren't any aftermarket being made. I found a few salvage on eBay but most are 89462-20030 and 89462-20020. Does anyone know if these would work on my 92?
I have my coolant drained right now so I wanted to take out my temp sensors and give them a clean. Of course, the larger one, the cold start temperature switch/timer sheared off as I torqued it back in. Part number is 89462-20040 . I did some searching and it seems like there aren't any aftermarket being made. I found a few salvage on eBay but most are 89462-20030 and 89462-20020. Does anyone know if these would work on my 92?
Dec 29, 2013 | 05:30 PM
#2
Registered User
Joined: Jul 2012
Posts: 452
Likes: 3
From: Sacramento, CA
I know it's not what your asking but, here's a list of vehicles that use part number 89462-20040: http://www.toyotapartszone.com/Page_...er=89462-20040
Thread
Thread Starter
Forum
Replies
Last Post
