Clockspring / modern steering wheel swap?
#1
Registered User
Thread Starter
Join Date: Jul 2010
Location: Morro Bay, CA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Clockspring / modern steering wheel swap?
So I've built a functioning prototype transmission / fan controller for my 86 4Runner and am at the point where I would like to install paddle shifters. Problem being that there is no clock spring on these early years that iI know of, so getting the shift signal off the steering wheel is presenting an issue.
Has anyone installed one / know of one that will bolt up, or even fir for that matter, or done a steering wheel swap for one with wheel mounted controls?
I was planning on keeping the factory steering wheel and just adding a clock spring, bit would love a modern wheel with stereo controls or something so that I could use those buttons to navigate the menu and change setting on my fan controller all from the wheel as well.
Has anyone installed one / know of one that will bolt up, or even fir for that matter, or done a steering wheel swap for one with wheel mounted controls?
I was planning on keeping the factory steering wheel and just adding a clock spring, bit would love a modern wheel with stereo controls or something so that I could use those buttons to navigate the menu and change setting on my fan controller all from the wheel as well.
Last edited by a7mgte; 09-29-2013 at 05:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
jon.r
General Vehicle Related Topics (Non Year Related)
8
07-11-2015 03:34 PM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM