Cap with a burnt high tension cord plug
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Moreno Valley, Ca
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Cap with a burnt high tension cord plug
What would cause the cap to get severly burnt inside the high tension cord plug area? I tried to get pics but my camera is louzy. When I removed the High Tension cord I had "ash" left inside the cap. upon inspection it's severly burnt.
Cap and cord have less than 3000 miles on them.
Name that failure.
Thanks
-=Morphine=-
Cap and cord have less than 3000 miles on them.
Name that failure.
Thanks
-=Morphine=-
#4
Registered User
Thread Starter
Join Date: Jan 2005
Location: Moreno Valley, Ca
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
High Tension cord goes from the cap to teh coil/ignitor.
When I said the "plug" I'm talking about the actual plug this cord connects to on the cap side.
-=Morphine=-
When I said the "plug" I'm talking about the actual plug this cord connects to on the cap side.
-=Morphine=-
#6
Registered User
Originally Posted by kyle_22r
sounds like possibly a bad/dirty connection causing it to arc across.
clean em up and reinstall and see if it happens again. could also be a faulty component.
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
07-16-2015 06:20 AM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM