A/C Drier Help
Jun 21, 2019 | 10:25 AM
#1
Thread Starter
Registered User
Joined: Jun 2019
Posts: 5
Likes: 0
A/C Drier Help
I have an '87 Toyota truck that I am redoing the A/C on. I am currently replacing the drier and I do not know which way the "IN" fitting should face. Any help would be greatly appreciated.
Jun 21, 2019 | 11:43 AM
#3
Registered User
Joined: Sep 2007
Posts: 8,380
Likes: 871
From: San Francisco East Bay
Here's a drawing:
http://web.archive.org/web/201102052.../3systemco.pdf
"IN" comes from the condenser (which comes from the compressor, in the direction of refrigerant flow). "OUT" connects to the line crossing back in front of the condenser, on its way to the firewall, to the cooling unit.
http://web.archive.org/web/201102052.../3systemco.pdf
"IN" comes from the condenser (which comes from the compressor, in the direction of refrigerant flow). "OUT" connects to the line crossing back in front of the condenser, on its way to the firewall, to the cooling unit.
Thread
Thread Starter
Forum
Replies
Last Post
10psiMaxima
95.5-2004 Tacomas & 96-2002 4Runners
8
Dec 21, 2003 05:23 PM
