hi im having trouble finding a bolt to thread into the 4 holes in the front of the frame on my 2nd gen 4runner, for my TG bumper. i just need to know the thread size because im having a hard time finding a large selection of metric bolts at my local lowes. or im open to other ways of installing this, i was thinking of drilling out the nuts welded in the frame and using large bolts and washers all the way through the frame, but it does get mighty close to the radiator on the other side

 

bumpity-ump

 

the bolts for the tow hooks are 12 x 1.25......

Not sure if that helps

Repo

 

yup that exactly what it was and the thread is the same for the smaller bolt as well,
so for anyone else out there the 2 bolts on the front of the frame for the bumper are
12 x 1.25 ( they were both labled fine thread as well )
10 x 1.25