Bud Built and a ARB Bumper
Apr 21, 2006 | 05:19 PM
#2
Contributing Member
Joined: Nov 2005
Posts: 8,875
Likes: 3
From: Longmont, CO
It bolts into the two inner holes in the upper crossmember and 4 flat head allen bolts up through the bottom into the lower crossmember. If you have a Sonoran Steel IFS truss, it bolts to that too.
Not sure where the ARB bolts up.
I'm sure Bud would know, give him a call!
Not sure where the ARB bolts up.
I'm sure Bud would know, give him a call!
Apr 21, 2006 | 05:20 PM
#3
Thread Starter
Registered User
Joined: Dec 2002
Posts: 4,655
Likes: 0
From: Idaho
Originally Posted by tc
It bolts into the two inner holes in the upper crossmember and 4 flat head allen bolts up through the bottom into the lower crossmember. If you have a Sonoran Steel IFS truss, it bolts to that too.
Not sure where the ARB bolts up.
I'm sure Bud would know, give him a call!
Not sure where the ARB bolts up.
I'm sure Bud would know, give him a call!
I e-mailed him, he doesnt know.. He said it works with a TJM, how do they mount?
The arb wraps around the crossmember, I have a skidplate there now that bolts to the factory holes...
Aug 14, 2006 | 05:25 PM
#4
Registered User
Joined: Nov 2004
Posts: 322
Likes: 0
From: snoqualmie,wa
the tjm bolts to the stock bumper holes and throught a set of holes on top of the front body mount, there is a fair amount of space between the crossmember and the subframe for the tjm, haven't looked at the arb up close yet but i think its simular...
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
Jun 13, 2022 07:40 PM
1uzRunner
84-85 Trucks & 4Runners (Build-Up Section)
63
Nov 10, 2018 03:58 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
Jun 11, 2017 08:36 PM
justdifferentials
Vendors Build-Ups (Build-Up Section)
0
Sep 5, 2015 06:52 PM
