Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS
Sponsored by:
Sponsored by: DashLynx

BJ spacers question

Thread Tools
 
Search this Thread
 
Old 05-02-2006, 02:35 PM
  #1  
Registered User
Thread Starter
 
curly_c's Avatar
 
Join Date: Jan 2006
Location: Rocklin Cali
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
BJ spacers question

is it ok to buy used BJ spacers? i can get a deal but i've heard that you have to grind down something to fit them??? im not quite sure i havent done alot of searchin on that but would a used pair of BJ spacers be ok to buy as long as there is nothin wrong with them?
Old 05-02-2006, 02:37 PM
  #2  
Sponsor
 
Tofer's Avatar
 
Join Date: Jul 2004
Location: Puyallup WA.
Posts: 9,173
Received 6 Likes on 5 Posts
yes BJ spacers are nothing more then a block of aluminum wiht 5 holes drilled in it.. you grind own the upper a arm.
Old 05-02-2006, 02:38 PM
  #3  
Registered User
Thread Starter
 
curly_c's Avatar
 
Join Date: Jan 2006
Location: Rocklin Cali
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
cool. i can probably get myself a pair for really cheep. i might as well go for it.
Old 05-02-2006, 02:40 PM
  #4  
Sponsor
 
Tofer's Avatar
 
Join Date: Jul 2004
Location: Puyallup WA.
Posts: 9,173
Received 6 Likes on 5 Posts
sweet. you might want to look into a diff drop and Manual locking hubs.. i kept blowing out CV boots after i installed my BJ spacers until i installed the man. hubs.
Old 05-02-2006, 02:51 PM
  #5  
Registered User
Thread Starter
 
curly_c's Avatar
 
Join Date: Jan 2006
Location: Rocklin Cali
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
yea im going to get some manual hubs once i get around to it. everything in the front is still at stock level but i plan on getting those once i go taller. there are two massive toyota wreckin yards in ranch cordova so i will be seeing what some aisins hubs go for at those places.
Old 05-02-2006, 03:09 PM
  #6  
Sponsor
 
Tofer's Avatar
 
Join Date: Jul 2004
Location: Puyallup WA.
Posts: 9,173
Received 6 Likes on 5 Posts
try to get them online if you can.. i went to TAP and they were $50 bucks each (100 for the pair) you can usually find them on forums / ebay for about 50-60. TAP is usually my LAST chance resort.
Old 05-02-2006, 03:44 PM
  #7  
Registered User
Thread Starter
 
curly_c's Avatar
 
Join Date: Jan 2006
Location: Rocklin Cali
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
holly ÅÅÅÅ. 100 bucks. ive seen them for like 30-40. i dont plan on buying them for anymore than that. thanks for the heads up.
Old 05-02-2006, 03:51 PM
  #8  
Sponsor
 
Tofer's Avatar
 
Join Date: Jul 2004
Location: Puyallup WA.
Posts: 9,173
Received 6 Likes on 5 Posts
ya i called them as asked "how much for a pair of manual locking hubs and do you have them in stock". the guy on the phone said " yep! 50 bucks." i was like sweet. i'll be there in a hour. fought 5 o'clock traffic to drive from stockton to sac and got there he had them sitting there waiting for me, rang me up and said ok that'll be $108. i was like but you quoted me 50... he said "ya well thats per hub price, i mean if you bought 5 of them are you expecting to pay 50 for them too?" i said no, but when i called as asked how much a pair of hubs were and was quoted 50 bucks i expect to pay that much. normally you buy these in pairs... his repsonce was "well you dont HAVE to buy them." but i had already wasted 1/4 a tank of gas an hour of my time to get there so i ended up paying the 100 bucks. i was pissed.
Old 05-02-2006, 03:56 PM
  #9  
Registered User
Thread Starter
 
curly_c's Avatar
 
Join Date: Jan 2006
Location: Rocklin Cali
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
thats gay man. those people are pricks out there. why the hell would you buy just one hub? sorry you had to pay that.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
punks_is_4x4
86-95 Trucks & 4Runners
10
08-21-2015 01:35 PM
4Runnin2000
95.5-2004 Tacomas & 96-2002 4Runners
0
07-29-2015 06:09 PM
coffey50
Offroad Tech
17
07-28-2015 10:55 AM
terminator
Misc Stuff (Vehicle Related)
3
07-27-2015 07:13 PM



Quick Reply: BJ spacers question



All times are GMT -8. The time now is 12:49 PM.