Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Auto Trans Question

Old Apr 3, 2006 | 11:08 AM
  #1  
69 1/2 Six PAck Bee's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 47
Likes: 0
From: Ontario, California
Auto Trans Question

Hi all,
My '90 has an A340H and I have recently begun to get a delayed 1-2 upshift when I first start off in the morning.
(50degrees/F)
Last time it was doing this I changed out the fluid and it was okay. The trans shifts great after a few blocks and stays that way regardless of engine/trans temp. I again changed out the fluid but this time to no avail.
I am thinking the 1-2 upshift spool is sticking and maybe the solenoid coil is on it's way out yet I get no "code" when I diagnose it.
What do you think?
If it is the solenoid which one is it?
Thanx,
Bud
Reply
Old Apr 3, 2006 | 03:12 PM
  #2  
kt19's Avatar
Registered User
 
Joined: Mar 2006
Posts: 39
Likes: 0
From: Cheyenne, Wy
Try an additive before you get to far in. I like Trans X, it has always helped out every tranny I have put it in and I continue to put it in whenever I service a tranny. good luck
Reply
Old Apr 3, 2006 | 05:15 PM
  #3  
69 1/2 Six PAck Bee's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 47
Likes: 0
From: Ontario, California
I put in a pint of Lucas when I changed the fluid..
Reply
Old Apr 4, 2006 | 06:09 AM
  #4  
kt19's Avatar
Registered User
 
Joined: Mar 2006
Posts: 39
Likes: 0
From: Cheyenne, Wy
You may need to dig into it then. Search the forum there are alot on the transmission selinoids and i think you will find what you need.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
D.B.T. 87 4x4
86-95 Trucks & 4Runners (Build-Up Section)
0
Jul 20, 2015 04:51 PM
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
6
Jul 16, 2015 06:20 AM
andrewtexas123
86-95 Trucks & 4Runners
3
Jul 14, 2015 04:29 AM
KBar
86-95 Trucks & 4Runners
3
Jul 13, 2015 06:01 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 10, 2015 06:21 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 08:17 PM.